How To Install 1-inch Transfer Case Drop Kit || Jeep Mods E37

How to install a 1-inch transfer case drop in minutes to alleviate drive train vibration on lifted jeeps and trucks. Not a long project, but you could also have to modify your transmission house because you can't shift. See that video if you have this problem after the install. https://youtu.be/JANY3n9G2Wo So when doing this transfer case drop install, never take all the bolts out of the mount "skid plate", you want to do only one side at a time. First, you want to get a jack and put this under the transfer case mount to help support the weight. Then lose the bolts on one side just enough to allow the other side both the mount one inch of room when you take out the bolts. Then repeat the steps for the other side, be sure that you tight all the bolts once both sides are complete, would hate for this to fall off on the trail. Tools and parts: Rough Country Transfer Case Drop Kit Jeep Wrangler YJ | 4-6" Lift: https://amzn.to/3ajAmlp Milwaukee 18-Volt Drill and Impact Driver Kit: https://amzn.to/366BwxM Piece Husky Mechanics Tool Set: https://amzn.to/3kuGUzD Jump To In Video: 00:00 How To Install 1-inch Transfer Case Drop Kit 02:00 What's In The Box For A 1-inch Transfer Case Drop Kit 02:31 Installing The 1-inch Transfer Case Drop Kit 06:28 Closing Thoughts On the 1-inch Transfer Case Drop Kit Check out our shop on our website for branded gear: https://www.chrisdoeswhat.com/our_shop/ Support us by shopping through our Affiliate Links! Amazon: https://amzn.to/351krTR