How To Remove Stuck Pitman Arm

4K views May 20, 2022

How we pulled our seized on Pitman Arm when just a Puller and PB Blaster won't work. In this ho to, we pull a rusted-on pitman arm off our old jeep to correct the steering for a 4-inch lift kit we are installing. Tools and parts: Conical Pitman Arm Puller: https://amzn.to/39xiTFo Milwaukee 18-Volt Drill and Impact Driver Kit: https://amzn.to/366BwxM Piece Husky Mechanics Tool Set: https://amzn.to/3kuGUzD You can rent a pitman arm puller from your local auto store if you don't want to buy one. We rented a puller but it didn't work for us. The first puller we trashed the threads trying to get the pitman arm off, even after spraying it down with PB Blaster. We did have an air chisel and weren't going to use a torch because this would melt the seals, so we grabbed the grinder. We then ground down far enough to leave very little metal so that we could use a hammer and chisel to crack the pitman arm. The pitman arm puller was left on with a lot of tension on it to ensure as it started cracking it would come off. After a bit of hammering the pitmn arm came right off and our son was sure happy. 00:00 Intro 01:05 How To Remove Stuck Pitman Arm 02:45 Our Final Thoughts How To Remove Stuck Pitman Arm Check out our shop on our website for branded gear: https://www.chrisdoeswhat.com/our_shop/ Support us by shopping through our Affiliate Links! Amazon: https://amzn.to/351krTR

#Custom & Performance Vehicles
#Towing & Roadside Assistance
#Vehicle Modification & Tuning
#Vehicle Repair & Maintenance