How To Install A Body Lift || Jeep Mods E43

How to install a body lift most of the time is not that hard. Most of the time the hardest part is breaking the bolts loose on the factory mounts. We are actually dropping our body down from a 3 to one inch, we know that sounds weird to a few, A body lift does stretch components between the frame and the body, also it will add extra space between your bumpers and leave a visible gap people can see when looking at your ride. When doing your install, you have to watch out for clearances like the fan or shifters. Nothing like starting your car for the first time after the install and the engine fan eating your fan shroud, and you can't shift. With a 1-inch body lift or less, not likely to have any issues, but when you go high, expect to move stuff to make it work again. Tools And Parts: Prothane 1-113-BL Black 1" Lift Body Mount for YJ: https://amzn.to/3csq9UL TEKTON 1/2 Inch Drive Click Torque Wrench (10-150 ft.-lb.): https://amzn.to/3tZdXki Milwaukee 18-Volt Drill and Impact Driver Kit: https://amzn.to/366BwxM Husky Mechanics Tool Set: https://amzn.to/3kuGUzD 00:00 How To Install A Body Lift 01:32 Unbox The Body Lift And Laying Out The Pieces 02:04 Where The Body Lift Kit Parts Go 03:05 Move Your Radiator For A Body Lift 04:20 Install Jeep Grill Cushion Mounts 05:36 Preparing To Install Body Lift 06:50 Remove Body Mounts On Jeep 07:33 How To Lift Jeep Body And Install Body Lift 10:52 Tighten Up And Torque Body Lift Bolts 11:48 Mount Radiator For New Body Lift