582
31
13.4k
377
1.5k
Well, just killed the budget as our engine repair went from $800 when we were just replacing the head, to $2,400 to replace the long block. We lost the $800, this was money that we used buying the new head and gasket, but you live and learn. At the end of this project, we will total up all the cost if you have the same project in mind.
When we got the new head on we got low compression in cylinder 3 and 4 on our boat. While we may have been able to run the engine like this, it probably would have used a lot of oil. This would not have been good for the environment and wildlife in our lakes and oceans. This is probably why we found so much oil left under the seat in our Bayliner Bowrider from the previous owner.
If you like this and it has helped or you have an idea to improve this post, feel free to leave a comment below. You can also send us direct feedback from Contact Us below if you so desire. Our mission is to help others through self-discovery and improvement, your journey begins with that first step.
See our shop for branded gear!
Check out Dining in with Danielle for great recipes!
See About Us author information!
Leave feedback, all information comes from our experiences, it can be flawed.
Equipment:
All videos are edited with Sony VEGAS Pro
https://amzn.to/2GrzE77
Our video studio does have a green screen with umbrella lighting
https://amzn.to/2BVIlpq
All recording equipment is Sony and our main camera is the HDR-CX675 offering servo steadied filming and 5.1 sound.
https://amzn.to/2BlJxQb
5823113.4k3771.5k
