We built the latch system for our ski lover on this old Bayliner Bowrider 175. This had to be one of the easiest things we have done in this project. Now we are on to painting the floor cause it is still so ugly. Want a pretty floor that hides all the labor it took …
Custom Boat Ski Locker Finish EP #35 || Bayliner Bowrider 175 Read More »
We just got all the fiberglass done for the ski locker hatch. Now we have to figure out how we are going to complete the ski locker hardware to lock it to the floor. The ski locker turned out very well and was so strong even though we used two boards. This ski locker hatch …
Ski Locker Fiberglass Done EP #34 || Bayliner Bowrider 175 Read More »
We install the new boat floor and cut in the ski locker today, nice not to walk on planks across stringers. We had to get all the rot out of the floor of this boat, did not take the floor out all the way to the edge of the hull. We used marine 14-inch marine …
Plywood Boat Floor Install EP #21 || Bayliner Bowrider 175 Read More »
Took our boat window off, getting back to work on our floor, have so much left on the Mercruiser 3.0. We have taken the window off the Bayliner Bowrider 175 and are continuing to clean. Meguiar’s is working perfectly to clean up the oxidation on the fiberglass. The floor in our boat is fitted raw …
Restoration Update, Windows Removed EP #19 || Bayliner Bowrider 175 Read More »
We go over why the new head didn’t work on our engine, now going to do a full rebuild on our boat engine. Keep on digging and find more things that need to be replaced or repaired on this 2004 Bayliner Bowrider 175. For this boat we would really love not to spend over $5,000, …
Boat At Shop, Our Plans After EP #14 || Bayliner Bowrider 175 Read More »
I think sanding Boat Bilge and Stringers is the most uncomfortable part of the restore of this 2004 Bayliner Bowrider 175. We don’t think that the new floor will leak water, but if it does we don’t want the stringers to rot. Fiberglass is amazing, but installing it has to be the hardest part of …
Boat Bilge. Preparing for Fiberglass EP #11 || Bayliner Bowrider 175 Read More »
We go over what we think this boat restore will cost and what we have spent so far. The Mercurice 3.0 engine only needs a cylinder head to fix the issue. The rest of the thing in the project to restore this 2004 Bayliner Bowrider 175, though cheaper, will nickel and dime your wallet. Well, …
Budget-Friendly Boat Restore EP #9 || Bayliner Bowrider 175 Read More »
A lot of Rot in this Bayliner Bowrider 175, we are cutting out and digging out all the soft spots Boat restoration gets bigger the more we dig and discover, but we think we are up for the challenge. We hope to learn from this project as it fits well with our bigger dream. It …
Remove Boat Floor, Lot Of Rot EP #7 || Bayliner Bowrider 175 Read More »
