We replace our Oil Sending Unit, added a Fuel Filter, replace our alternator, and rig up a PVC pipe on our 2004 Bayliner Bowrider 175. We know we have good oil pressure because we have an oil pressure test kit that verified it on this boat. We did take the boat out using only the …
Install Oil Sending Unit And Fuel Filter EP #54 || Bayliner Bowrider 175 Read More »
We think these boat cleats on our Bayliner Bowrider 175 are going to hold up! They didn’t break when I pulled against them with 230lb, and they worked great at the dock during boat testing. The black nylon isn’t going to rust like the old cleats on this Bayliner Bowrider, and they only cost $18. …
Install Of Boat Cleats EP #53 || Bayliner Bowrider 175 Read More »
To go with our grey boat theme we opted to paint our custom speaker plates. I did like the wood grain but it just didn’t work with anything else in the boat. We used paint to seal the wood then added Kiwi Grip to add texture. All the materials used for this project were scrapes …
Custom Boat Speaker Plates Painted EP #42 || Bayliner Bowrider 175 Read More »
When we started our aluminum boat widows restore the chipping paint and corroding was bad, now they are so pretty. In this video you will see how we restored our boat windows, this would work on any metal frame window. It was a lot of work, and it is much easier to do with the …
Restoring Aluminum Boat Windows EP #40 || Bayliner Bowrider 175 Read More »
We built the latch system for our ski lover on this old Bayliner Bowrider 175. This had to be one of the easiest things we have done in this project. Now we are on to painting the floor cause it is still so ugly. Want a pretty floor that hides all the labor it took …
Custom Boat Ski Locker Finish EP #35 || Bayliner Bowrider 175 Read More »
We just got all the fiberglass done for the ski locker hatch. Now we have to figure out how we are going to complete the ski locker hardware to lock it to the floor. The ski locker turned out very well and was so strong even though we used two boards. This ski locker hatch …
Ski Locker Fiberglass Done EP #34 || Bayliner Bowrider 175 Read More »
So we have to fill holes and put some fiberglass down to prepare the wood boat floor surface for paint. Glad to see this floor is coming together, working with fiberglass, expanding foam, and wood has been fun, but we are glad to be done. In a future boat, we get we know that this …
Laying Fiberglass Down Filling Holes In Boat Floor EP #33 || Bayliner Bowrider 175 Read More »
Boat Ski Locker Install In Rebuilt, what’s the point of restoring a ski boat with no ski locker, not much I guess. Here we put in the basic door for the ski locker our 2004 Bayliner Bowrider that we are restoring. In later videos, we will make it look pretty and paint the floor. We …
Boat Ski Locker Install In Rebuilt Floor EP #27 || Bayliner Bowrider 175 Read More »
The engines out, the Stern Drive off, and the engine is ready to be shipped to the machine shop Xcessive Engines for a rebuild. It should only take about 2 weeks to get the engine back, and if Xcessive Engines has engines in stock they ship out right away. I guess it being summer their …
Stern Drive Off, Engine Out, Rebuild EP #13 || Bayliner Bowrider 175 Read More »
I think sanding Boat Bilge and Stringers is the most uncomfortable part of the restore of this 2004 Bayliner Bowrider 175. We don’t think that the new floor will leak water, but if it does we don’t want the stringers to rot. Fiberglass is amazing, but installing it has to be the hardest part of …
Boat Bilge. Preparing for Fiberglass EP #11 || Bayliner Bowrider 175 Read More »
